Hot and cold water units
This product is not available as a standard. If you have any questions, please contact the Taiwan sales department. (Click the contact button on the right.
)



Double-effect heat pump
A. Double-effect heat pump has the following functions
1. Simultaneous cooling and heating 2. Cooling alone 3. Heating alone 4. Heating first 5. Cooling first
It can replace electric heaters and gas and diesel boilers in places where electricity consumption and efficiency are insufficient, with high efficiency COP value.
1. Simultaneous cooling and heating 2. Cooling alone 3. Heating alone 4. Heating first 5. Cooling first
It can replace electric heaters and gas and diesel boilers in places where electricity consumption and efficiency are insufficient, with high efficiency COP value.


Air source heat pump/hot water unit
B. For gas source water heaters, the operating range is above 5℃ outside air temperature and the COP value is above 3.3.


Water source heat pump/heat recovery unit
C. Water-to-water heat pump, chilled water temperature below 25°C, hot water temperature below 55°C. Customizable products are available. The hot water container can use high-efficiency copper-nickel and titanium tubes. The maximum water outlet temperature of the two-stage screw compressor can reach 80°C.